Overview | Part Design Guidelines | Specifications | MHN Design Information
Die Buttons and Retainers | Tooling Standards | Troubleshooting
Tooling Set-Up and Alignment Procedures

Specifications

MHN06
Panel Thickness (MM)	Push-Out Perfor- mance (kN)	Twist-Out Perfor- mance (Nm)

0.70	1.10	27.35

1.00	1.50	32.70

1.25	1.63	37.20

1.50	1.75	41.70

2.00	2.00	50.65

2.25	2.13	55.10

2.50	2.25	59.60

MHN08
Panel Thickness (MM)	Push-Out Perfor- mance (kN)	Twist-Out Perfor- mance (Nm)

0.70	1.20	42.65

1.00	1.60	46.65

1.25	1.75	50.00

1.50	1.90	53.30

2.00	2.20	60.00

2.25	2.35	63.35

2.50	2.50	66.65

MHN10
Panel Thickness (MM)	Push-Out Perfor- mance (kN)	Twist-Out Perfor- mance (Nm)

1.00	3.00	75.00

1.25	3.50	81.25

1.50	4.00	87.50

1.75	4.50	93.75

2.00	5.00	100.00

2.25	5.50	106.25

2.50	6.00	112.50

2.75	6.50	118.75

3.00	7.00	125.00

MHN12
Panel Thickness (MM)	Push-Out Perfor- mance (kN)	Twist-Out Perfor- mance (Nm)

1.50	5.50	140.00

1.75	6.00	143.75

2.00	6.50	147.50

2.25	7.00	151.25

2.50	7.50	155.00

2.75	8.00	158.75

3.00	8.50	162.50

3.25	9.00	166.25

3.50	9.50	170.00

Home | Site Map | Search

FabriSteel A Division of Whitesell International Corporation
22100 Trolley Industrial Drive
Taylor, MI 48180-1872
(313) 299-8540

This page last modified 06/08/07 .
All information © 2007 Whitesell International Corporation

Site Use Policy