CS PierceForm Stud Specs

CS Series PierceForm Studs are property class 9.8 automatically installed, system-fed fasteners for installation in pre-pierced holes. Designed specifically for thick metal applications, these fasteners make a consistent mechanical attachment which provides a secure, permanent installation. Standard end configuration is the header point. Standard stud lengths (L) are: 16, 20, 25, and 30 mm. For applications where other end configurations or lengths are required, consult your sales representative.

Preferred Stud Size

Stud Length	CS6M	CS8M	CS1M
(L)	Part Numbers
16.0mm (0.69 in) +0.35mm (+0.01 in)	CS6M160	_	_

20.0mm (0.79 in) +0.42mm (+0.02 in)	CS6M200	CS8M200	CS1M200

25.0mm (0.98 in) +0.42mm (+0.02 in)	CS6M250	CS8M250	CS1M250

30.0mm (1.18 in) +0.42mm (+0.02 in)	CS6M300	CS8M300	CS1M300

Metric dimensions are listed first, inch dimensions shown below.

	Thread Size 6 g. TOL	A +0.5mm (+.02 in)	Ød₁ +0.5mm (+.02 in)	D +0.5mm (+.02 in)

CS6M	M6 x 1.0	8.50	8.90	9.90

CS8M	M8.0 x 1.25	10.00	11.40	12.65

CS1M	M10.0 x 1.5	12.00	15.00	16.13

	Panel Thickness S	ØG Ref	H


CS6M	2.00-2.74	12.9	2.3

	2.75-3.50	12.9	2.1

	3.51-4.27	12.9	1.8

	4.28-5.00	12.8	1.6

CS8M	2.25-3.00	16.6	2.8

	3.01-3.75	16.4	2.5

	3.76-4.50	16.1	2.3

	4.51-5.24	15.9	2.1

	5.25-6.00	15.6	1.9

CS1M	2.50-3.18	20.9	3.3

	3.19-3.84	20.5	3.1

	3.85-4.50	20.3	3.0

	4.51-5.16	20.1	2.8

	5.17-6.00	19.8	2.6

Home | Site Map | Search

FabriSteel A Division of Whitesell International Corporation
22100 Trolley Industrial Drive
Taylor, MI 48180-1872
(313) 299-8540

Site Use Policy

Go To Top