Die Buttons and Retainers

The Die Button, held firmly in the die by the Retainer, supports the metal panel and forms the barrel of the fastener to lock it in place against the bottom surface of the stamping with a complete radial engagement.

NOTE: Refer to CS tooling matrix

CS Studs
Stud Size	Metal Thickness (MM)	Die Button Number
5mm	2.00-2.74	CSB-06-230
	2.75-3.50	CSB-06-310
	3.51-4.27	CSB-06-380
	4.28-5.00	CSB-06-460

6mm	2.00-2.74	CSB-06-230
	2.75-3.50	CSB-06-310
	3.51-4.27	CSB-06-380
	4.28-5.00	CSB-06-460

8mm	2.25-3.15	CSB-08-280
	3.16-4.05	CSB-08-380
	4.06-5.00	CSB-08-470
	5.01-6.00	CSB-08-560

10mm	2.50-3.18	CSB-10-300
	3.19-3.84	CSB-10-370
	3.85-4.50	CSB-10-430
	4.51-5.16	CSB-10-500
	5.17-6.00	CSB-10-570

Stud Size	Minimum Installation Tonnage
5mm	12
6mm	12
8mm	15
10mm	25
12mm	TBD

Die Button Retainer - HRAM-32

Home | Site Map | Search

FabriSteel A Division of Whitesell International Corporation
22100 Trolley Industrial Drive
Taylor, MI 48180-1872
(313) 299-8540

Site Use Policy

Go To Top