Die Buttons and Retainers

The Die Button, held firmly in the die by the Retainer, supports the metal panel and forms the barrel of the fastener to lock it in place against the bottom surface of the stamping with a complete radial engagement.

NOTE:  Refer to CP tooling matrix

Die Button	CP Studs Stud Size Metal Thickness (MM) Die Button Number 5mm 0.75-1.24 CPB-06-100 1.25-1.74 CPB-06-150 1.75-2.00 CPB-06-200 6mm 0.75-1.24 CPB-06-100 1.25-1.74 CPB-06-150 1.75-2.00 CPB-06-200 8mm 0.75-1.24 CPB-08-100 1.25-1.74 CPB-08-150 1.75-2.25 CPB-08-200 10mm 0.75-1.24 CPB-10-100 1.25-1.74 CPB-10-150 1.75-1.99 CPB-10-190 2.00-2.50 CPB-10-230 12mm 1.50-2.00 CPB-12-175 Stud Size Minimum Installation Tonnage 5mm 12 6mm 12 8mm 15 10mm 25 12mm TBD
Die Button Retainer - HRAM-32